S&P ILHB-ILHT ECOWATT
High temperature and smoke extraction fans
Soler & Palau manufactures a wide range of solutions for smoke extraction and high temperature air transportation. Meeting different designs and applications, S&P offers axial, roof, duct, centrifugal, garage and tunnel fans with different protection classes: F300:120, F400:120, etc.
Description
The S&P ILHB-ILHT ECOWATT models come in two types:
- ILHT CC ECOWATT: fan with multidirectional inlet plenum, motor shaft horizontal or vertical
- ILHT MV ECOWATT: ventilation unit only, motor shaft horizontal or vertical.
Construction consists of:
- Panels made of galvanized sheet steel;
- Modular structure in aluminum profiles;
- 4 mounting brackets;
- Rectangular duct couplings;
- Direct drive centrifugal backward curved impeller manufactured from galvanized sheet steel;
- Full access for cleaning and maintenance without dismantling the fan from the duct system;
- External control fitted and wired;
- Thermal protections integrated;
- Fault relay integrated;
- Fan speed/set point adjustable with the potentiometer placed in the control or with an external control type REB ECOWATT;
- Analogical input to control the fan with 0-10V input signal;
- Modbus RTU to RS485 port;
- ON-OFF electrical isolation switch;
The ILHB/ILHT ECOWATT are approved for extraction of hot gases and smokes in case of fire. This operation mode is automatic and does not require any parameterization: in case of extraction of hot gas at a temperature higher than 200°C, the control automatically switches to high speed and inhibits the internal thermal protections. The emergency operation mode can also be activated manually with a BDRA control box (accessory). CAV / VAV / COP models are deactivated. Each of the three versions has different characteristics. The VAV version has a variable air volume, while the COP version maintains constant pressure, and the CAV version provides a constant airflow rate with an airflow display.
The ILHB/ILHT ECOWATT can be installed in any position and connected from any side. Electrical supply is single-phase 230V 50/60 Hz for models 355, 400 and 450 and three-phase supply 400V 50/60Hz for models 500, 630 and 710.
Оn request, a reinforced sealing with grease resistant seal can be added specifically for kitchen applications, as well as a condensate drain, which is provided not mounted. Optional two-speed motors can be installed, which are not compliant with ErP. Displays for the VAV and CAV versions are provided separately.
Application
- Smoke and hot gas extraction in case of fire.
- Extraction of stale air from commercial and industrial premises.
- Extraction of pollutants in professional kitchens.
Technical characteristics
-
Range 6 sizes: 355, 400, 450, 500, 630 and 710
-
Air performance range from 500 up to 24.000 m3/h
-
Brushless motor, class F insulation with external IP55 control
-
Air stream temperature up to 120°C in continuous with motor at -10/+40ºC max. ambient air
Technical catalogue